YASKAWA 1000 Series Installation Manual page 21

◆
Wire Gauges, Tightening Torques, and Crimp Terminals
Wire Gauges and Tightening Torques
■
Wire gauge and torque specifications are listed in
Tightening
Terminal Screw
signal Size
N m (in lb)
D0 to DF
SI, SE, SP, 0.22 to 0.25
M2
SC, SN, (1.95 to 2.21)
SD, FE
Crimp Terminals
■
Yaskawa recommends using CRIMPFOX 6 by Phoenix Contact or equivalent crimp
terminals with the specifications listed in
6 mm
d2
d1
L
YASKAWA ELECTRIC TOBP C730600 39B 1000-Series Option DI-A3 Installation Manual
Table 2 Wire Gauges and Tightening Torques
Bare Cable
Torque
Applicable
Gauges mm
Stranded wire:
0.25 to 1.0
(24 to 17 AWG)
Solid wire:
0.25 to 1.5
(24 to 16 AWG)
Table 3 Crimp Terminal Sizes
Wire Gauge Phoenix Contact
mm
2
0.25 (24 AWG) AI 0.25 - 6YE
0.34 (22 AWG) AI 0.34 - 6TQ
0.5 (20 AWG) AI 0.5 - 6WH
Table 2.
Recomm. Applicable
Gauge mm Gauges mm
2 2
0.75 0.25 to 0.5
(18 AWG) (24 to 20 AWG)
Table 3 for wiring to ensure proper connections.
L
Model mm (in)
10.5 (13/32)
10.5 (13/32)
14 (9/16)
5 Installation Procedure
Crimp Terminals
Recomm.
Gauge mm
2
0.5
(20 AWG)
d1
mm (in)
0.8 (1/32)
0.8 (1/32)
1.1 (3/64)
Wire
Type
2
Shielded
twisted
pair, etc.
d2
mm (in)
2 (5/64)
2 (5/64)
2.5 (3/32)
21