Features - Fujitsu ARGA18FMTA Design & Technical Manual

1.

FEATURES

„ „
MODELS
ARGA18FMTA / AOGA18FBTAH
ARGA25FMTA / AOGA25FBTAH
„ „
FEATURES
z „
Installation styles
Embedded in Ceiling
z „
Slim & compact design
In the case of rear suction type, as seen from lower rear part.
In addition to the slim height of 270 mm, further compactification is attained by reducing 65 mm
from the width with the flanking control box embedded inside the chassis.
z „
Easy maintenance
The fan and motor is easily accessible by the divided panel structure.
1
4
2
3
Control Box united with main unit
One-touch operating and easy-to-install
long-life filter (optional)
1. Control box
2. Fan casing
3. Fan
4. Motor
Bottom panel: 2 units
AOGA18FBTAH
Hanging from Ceiling
Structural improvement is attained by making the
bottom panel in two pieces, front and rear.
The internal fan casing is also manufactured in two
pieces, namely upper and lower. The maintenance
of the motor and fan can be easily carried out by
removing the rear panel and the lower part of the
casing while leaving the main chassis installed.
- (01 - 01) -
AOGA25FBTAH