Switching The Display Mode - Philips AC2889 User Manual

Switching the display
mode
The air purifier has dual display mode,
IAI display and PM2.5 display.
Note
• The air purifier operates in IAI
display mode by default.
1
Touch the light dimming button
for 3 seconds to switch to PM2.5
display mode (fig.s).
» blinks twice.
» The actual PM2.5 level displays
on the screen.
2
Touch the light dimming button
for 3 seconds again to switch back
to IAI display mode (fig.t).
» blinks twice.
» The IAI level displays on the
screen.
10 EN
5 Cleaning
Note
• Always turn the air purifier off and
unplug from the electrical outlet
before cleaning.
• Never immerse the air purifier in
water or any other liquid.
• Never use abrasive, aggressive, or
flammable cleaning agents such as
bleach or alcohol to clean any part
of the air purifier.
• Only the pre-filter is washable. The
air purification filter is not washable
nor vacuum cleanable.
• Do not attempt to clean the filters
or air quality sensor with a vacuum.
Cleaning the body of the
air purifier
Regularly clean the inside and outside
of the air purifier to prevent dust from
collecting.
1
Use a soft, dry cloth to clean both
the interior and exterior of the air
purifier.
2
The air outlet can also be cleaned
with a dry, soft cloth.