Table of Contents
Advertisement
Switching the display
mode
The appliance has three display modes,
PM2.5 display, IAI display and humidity
level display.
Note
• The appliance operates in PM2.5
display mode by default.
1
Touch and hold
switch to IAI display (fig. v).
» IAI indicator and the actual IAI
level display on the screen.
2
Touch and hold
twice to switch to actual humidity
level display (fig. w).
3
Touch and hold
switch to PM2.5 display (fig. x).
» PM2.5 indicator and the actual
PM2.5 level display on the
screen.
Note
• The screen will display humidity
level for 3 seonds and change to
display the highest level of IAI or
PM2.5 if one of which is not good.
for 3 seconds to
for 3 seconds
for 3 seconds to
Changing the Auto mode
setting
You can choose the Auto mode (
the Allergen mode (
mode (
).
Auto mode
In auto mode, the appliance selects
the fan speed in accordance with the
ambient air humidity and air quality.
•
Touch the fan speed button
select Auto mode (fig. y) .
» Auto (
) and
screen.
» The appliance operates in Auto
mode by default.
Allergen mode
The extra-sensitive allergen mode
is designed to react to even a small
change in allergen levels in the
surrounding air.
•
Touch the Auto mode button
select the Allergen mode (fig. z).
» Auto (
) and
screen.
Sleep (SL)
In Sleep mode, the air purifier operates
quietly on a very low speed.
•
Touch the Auto mode button
select the Sleep mode (
(fig. {).
» Sleep (
) and
the screen.
Note
• All lights will go off except
buttons are touched after one
minute.
• You can turn on the lights manually
by touching any buttons.
),
) and the Sleep
to
display on the
to
display on the
)
display on
if no
EN
11
Advertisement
Table of Contents
