Using The Light On/Off Function; Switching The Display Mode; Cleaning; Cleaning Schedule - Philips AC3259/80 User Manual

Using the light on/off
function
With the light on/off button, you can
switch on or off the air quality light,
the display screen and the function
indicators if needed.
1
Touch the light on/off button
once, the air quality light, the
display screen and the function
indicators will go off.
2
Touch the light on/off button
the third time, all lights will be on
again.
Switching the display
mode
The air purifier has two display modes:
Indoor Allergen Index (IAI) display
and PM2.5 display mode. When in IAI
mode, the display shows a number
between 1-12 to indicate the level of
airbone allergens. In PM2.5 mode the
display shows the particulate matter 2.5
concentration in the air in µg/m
Note
• The air purifier operates in IAI display
mode by default.
1
Touch the light on/off button
3 seconds again to switch to PM2.5
display mode (fig.u).
» The PM2.5 level displays on the
screen.
2
Touch the light on/off button
for 3 seconds to switch back to IAI
display mode (fig.v).
» The actual IAI level displays on
the screen.

5 Cleaning

Note
• Always unplug the appliance before
cleaning.
• Never immerse the appliance in water
or any other liquid.
• Never use abrasive, aggressive, or
flammable cleaning agents such as
bleach or alcohol to clean any part of
for
the appliance.
• Only the pre-filter is washable. The air
purification filter is not washable nor
vacuum cleanable.

Cleaning schedule

Frequency
When necessary
When F0
displays on the
.
3
screen
Every two
months
Cleaning the body of the
for
appliance
Regularly clean the inside and outside
of the appliance to prevent dust from
collecting.
1
Wipe away dust with a soft dry cloth
from the body of the appliance.
2
Clean the air outlet with a soft dry
cloth.
Cleaning method
Wipe the surface
of the appliance
with a soft dry
cloth
Clean the pre-
filter
Clean the air
quality sensors
EN
9