Filter Reset - Philips AC2889 User Manual

Filter alert light
status
A3 displays on the
screen
C7 displays on the
screen
A3 and C7 display
on the screen
alternately
1
Turn off the air purifier and unplug
from the wall outlet.
2
Take out the used air filter according
to the filter alert light status
displayed on the screen (fig.|).
Discard used filters.
Note
• Do not touch the pleated filter
surface, or smell the filters as they
have collected pollutants from the
air.
3
Remove all packaging material from
the new filters (fig.f).
4
Place the new filters into the air
purifier (fig.g).
5
Put the plug of the air purifier in the
wall outlet.
6
Touch and hold the reset button
for 3 seconds to reset the filter
lifetime counter (fig.}).
Note
• Wash your hands after changing a
filter.
Action
Replace the
NanoProtect filter
Series 3 (FY2422)
Replace the
NanoProtect filter
active carbon
(FY2420)
Replace both
filters

Filter reset

You can replace filters even if there is
no filter replacement code displayed on
the screen. After replacing a filter, you
need to reset the filter lifetime counter
manually.
1
Touch and
for 3 seconds to enter the filter reset
mode (fig.~).
» Code (A3) of the NanoProtect
filter Series 3 displays on the
screen.
2
Touch and hold
force reset the filter lifetime counter
of the NanoProtect filter Series 3
(fig.}).
3
Code (C7) of the Nanoprotect
filter active carbon displays on the
screen after the lifetime counter of
the NanoProtect filter Series 3 has
been reset (fig.).
4
Touch and hold
force reset the filter lifetime counter
of the Nanoprotect filter active
carbon and exit the filter reset
mode (fig.€).
simultaneously
for 3 seconds to
for 3 seconds to
EN 13