Changing The Auto Mode Setting - Philips AC2889 User Manual

1
Put the plug of the air purifier in the
wall outlet.
2
Touch to switch on the air purifier
(fig.j).
» The air purifier beeps.
» The air purifier operates under
the allergen mode by default.
» When the air purifier is warming
up, " " displays on the
screen. After measuring the
particulate matter only in the
air, the air purifier shows the IAI
level and operates in the auto
mode with
screen (fig.k).
» After measuring the air
quality for approximately
30 seconds, the air quality
sensor automatically selects
the appropriate air quality light
color.
3
Touch and hold
switch off the air purifier.
Note
• If the air purifier stays connected
to the electrical outlet after turning
OFF, the air purifier will operate
under the previous settings when
turned ON again.
8 EN
displayed on the
for 3 seconds to
Changing the Auto mode
setting
You can choose the Allergen mode
( ), the General mode (
Bacteria & Virus mode (
Allergen mode
The extra-sensitive allergen mode
is designed to react to even a small
change in allergen levels in the
surrounding air.
• Touch the Auto mode button
select the Allergen mode (fig.l).
» Auto (A) and
screen.
General mode
A smart auto-setting that automatically
adjusts the air purifier's settings to the
ideal level.
• Touch the Auto mode button
select the General mode (fig.m).
» Auto (A) and
screen.
Bacteria & Virus mode
The bacteria & virus mode boosts the
airflow to quickly reduce bacteria &
viruses.
• Touch the Auto mode button
select the Bacteria & Virus mode
(fig.n).
» Auto (A) and
screen.
)or the
).
to
display on the
to
display on the
to
display on the