Seat Leon 2010 Owner's Manual page 74

72 Cockpit
Resetting a memory
– Select the memory where you wish to erase the values.
A
– Hold down button on the windscreen wiper lever or the
A
the multifunction* steering wheel for at least 2 seconds.
The journey memory 1 collects the travel and consumption data from the
moment the ignition is switched on until it is switched off. If the journey is
continued within two hours of switching off the ignition, the new values will
be added to the existing trip recorder memory. The memory will automatically
be deleted if the journey is interrupted for more than two hours.
The total journey memory 2 collects the journey data for any number of indi-
vidual journeys (even if the ignition is switched off for longer than two hours)
up to a total of 19 hours and 59 minutes travel time or 1,999 km distance trav-
elled. The memory will automatically be deleted if one of the named values is
reached.
Memory indications
The following data can be viewed on the multifunction display using the
A ⇒ page 68, fig. 43
rocker switch
B
lever or by pressing button
steering wheel*.
•
Duration
•
Current fuel consumption
•
Average fuel consumption
•
Distance to empty
•
Distance
•
Average speed
•
Auxiliary speed
•
Digital display of speed
•
Speed warning at --- km/h
8)
It is not possible to see whether the alternative speed display is activated.
OK
⇒ page 68 on the windscreen wiper
⇒ page 68, fig. 44
or on the multifunction
8)
Personal selection of display
The driver can establish which displays are shown on the instrument panel
display as required:
button on
•
Select the submenu Multifunction Display Data from the Configuration
menu ⇒ page 74.
•
The displays can be activated or deactivated individually by marking the
required option and pressing the
the multifunction steering wheel*.
Duration in h and min
The display shows the amount of time which has elapsed since the ignition
was switched on.
The maximum display value in both memories is 19 hours and 59 minutes.
The memory will automatically be deleted once this value has been reached.
Current fuel consumption in l/100 km or l/h
The display will show the current fuel consumption in litres/100 km whilst the
vehicle is in motion or in litres/hour when the vehicle is in a stationary posi-
tion with the engine running.
Using this display you can see how your driving style affects fuel consump-
tion ⇒ page 157.
Average consumption in l/100 km
The average fuel consumption will be shown after a distance of approximately
100 metres has been travelled. Until then dashes will appear in the display.
The display will be updated every 5 seconds while the vehicle is in motion.
The amount of fuel used will not be shown.
Fuel range in km
The fuel range is calculated using the figures for tank content and current fuel
consumption. It shows how far the vehicle can travel using the same condi-
tions as a reference.
OK button on the windscreen wiper lever or