Seat Leon 2010 Owner's Manual page 181

When the cruise control is turned off the warning lamp
control deactivates completely when the 1st gear is engaged.*
Setting speed*
– Press the lower part SET/SET of the rocker switch
once briefly when you have reached the speed you wish to set.
When you release the rocker switch, the current speed is set and held
constant.
22)
Depending on model version
Safety first

turns off. The cruise
Fig. 131 Turn signal and
main beam headlight
lever: switch and rocker
switch for the cruise
control
⇒ fig. 131
Operating instructions
Adjusting set speed*
The speed can be altered without touching the accelerator or
the brake.
Setting a higher speed
– Press the upper part RES/+ of the rocker switch
A
A
increase the speed. The vehicle will continue to accelerate as
long as you keep the rocker switch pressed. When you release
the switch, the new speed is stored.
Setting a lower speed
– Press the lower part SET/– of the rocker switch
speed. The vehicle will automatically reduce its speed for as long
as you keep the switch pressed. When you release the switch, the
new speed is stored.
Practical tips
Driving
Fig. 132 Turn signal and
main beam headlight
lever: switch and rocker
switch for the cruise
control
⇒ fig. 132 A
to
A
A
to reduce the
A
Technical data
179