Seat Leon 2010 Owner's Manual page 265

– Press the bulb sideways and remove it from its housing
⇒ page 262, fig.
175.
– Installation is done in the reverse order.
Registration light
Safety first
Fig. 176 Number plate
light
Operating instructions
– To remove the light cover, unscrew the bolts
– Remove the bulb, moving it in the direction of the arrow and
⇒ fig.
outwards 177.
– Installation is done in the reverse order.
Glove compartment lamp*
– Insert screwdriver above, between the light and the glove
compartment.
– Carefully remove the light Next lift the light out sideways.
– Replace the bulb.
– Insert the light on the connector side, first underneath then push
at the top until it clicks into place.
Practical tips
If and when
Fig. 177 Number plate
light
⇒ fig.
176.
Technical data
263