Seat Leon 2010 Owner's Manual page 67

Memory displays
•
Driving speed
•
Journey duration
•
Average speed
•
Distance
•
Distance to empty
•
Average fuel consumption
•
Current fuel consumption
•
Outside temperature display
•
Speed warning
Km/h - Driving speed
Driving speed is digitally shown in the display.
min - Journey duration
The display shows the amount of time which has elapsed since the ignition
was switched on.
The maximum display value in both memories is 19 hours and 59 minutes.
The memory will automatically be deleted once this value has been reached.
Økm/h - Average speed
The average speed will be shown after running a distance of approximately
100 metres. Until then dashes will appear in the display. The display will be
updated every 5 seconds while the vehicle is in motion.
km - Distance travelled
The display shows the distance travelled since the ignition was switched on.
The maximum display value in both memories is 1999 km. The memory will
automatically be deleted once this value has been reached.
Safety first Operating instructions
Km - Fuel range
The fuel range is calculated using the figures for tank content and current fuel
consumption. It shows how far the vehicle can travel using the same condi-
tions as a reference.
Ø l/100 km - Average fuel consumption
The average fuel consumption will be shown
distance of approximately 100 metres has been travelled. Until then dashes
will appear in the display. The display will be updated every 5 seconds while
the vehicle is in motion. The amount of fuel used will not be shown.
l/100 km or l/h - Current fuel consumption
The display will show the current fuel consumption in litre/km whilst the
vehicle is in motion or in litre/hour when the vehicle is in a stationary position
with the engine running.
Using this display you can see how your driving style affects fuel consump-
tion ⇒ page 193.
Outside temperature display
The measurement range extends from -45°C to +58°C. At temperatures below
+4°C, an "ice crystal symbol" is displayed and a "warning" sounds if the
vehicle is moving at more than 20 km/h (ice warning). This symbol will flash
for about 10 seconds and remains lit until the outside temperature rises
above +4°C or 6°C if it was already lit.
Set speed indicator
When driving at the required speed, enter the speed indicator mode and
A
press the button (Reset), the display remembers the indicated speed. If
A
the indicated speed is exceeded, a warning message is displayed on the
6)
screen and a warning signal sounds.
This may be deactivated by pressing the button
6)
Depending on the model version, the message on the screen may vary and may be
represented by flashing of the speed indication or by a speed message.
Practical tips
Cockpit
⇒ page 64, fig. 42
after a
A
(Reset).
A
Technical data
65