Seat Leon 2010 Owner's Manual page 263

– Press on the side pin outwards and take out the bulb holder.
– Extract the blown bulb and change it for a new one.
– To refit follow the steps in reverse order, taking special care when
fitting the bulb holder.
Position light, fog light and reverse light on the tailgate
Safety first
Fig. 171 Lights on the
tailgate
Operating instructions
– Open the tailgate.
– Use a screwdriver to remove the cover
– Take the bulbholder out pressing on the securing pins and
⇒ fig.
extract it outwards 172.
– Replace the faulty bulb, rotating it to the left and outwards.
– Installation is done in the reverse order.
Practical tips
If and when
Fig. 172 Removing the
bulb holder
⇒ fig.
171.
Technical data
261