Seat Leon 2010 Owner's Manual page 261

⇒ page 258, fig. 164
– Remove the loops
the arrow and remove the cover.
– Remove the connector
– Unclip the retainer spring
inwards to the right.
– Extract the bulb and fit the replacement so that the rim of the
attachment plate is on the reflector cut-out.
Main beam headlights
Safety first
A
in the direction of
1
⇒ page 258, fig. 165 A
from the bulb.
2
⇒ page 258, fig. 165 A
pressing
3
Fig. 166 Main beam
headlights
Operating instructions
– Raise the bonnet.
⇒ fig. 166
– Remove the cover
⇒ fig. 167
– Remove the connector
⇒ fig. 167
– Press the spring
– Extract the bulb and fit the replacement so that it sits correctly
into the cut-out on the reflector.
– Installation is done in the reverse order.
Practical tips
If and when
Fig. 167 Main beam
headlights
A
by pulling on this.
C
A
from the bulb.
1
A
inwards and to the right.
2
Technical data
259