MVC-Data GC630 User Manual page 35

AccessZone® - PcManagement™ User Manual
Options below are only valid for GateController™ using a Bluetooth PC interface:
"Bluetooth connection PIN Code" is the PIN code used when making the initial connection
to a PC (creating the Link Key). Default code is "12345678"
"Reset Bluetooth Link Key" set a mark in the check box and click "OK" button. The new PIN
Code is stored in the GateController™ and the current link key in the GateController™ is
reset.
Erase the link key on the PC before making a new connection with the new Bluetooth
connection PIN code from the PC. The check box is automatically cleared when clicking the
"OK" button.
TIP!
This is also useful if PcManagement™ must be moved to a new PC. Reset the Bluetooth
Link Key and install PcManagement™ on the new PC. Create a new link key from the new
PC.
The user data files: db.mdb and config.xml (typically stored in
c:\ProgramData\AccessZone\) can be copied to the same location on the new PC. I.e. all
your settings and users are moved to the new PC.
You can also copy these two files to a backup media for easy restoring of your system in
case of a PC break down etc.
All information is subject to change without notice. All other products and brand names are registered trademarks of their respective companies
Copyright © 2005-2014 All rights reserved MVC-Data ApS Skalhuse 5 9240 Nibe Denmark Web www.mvc-data.com E-mail info@mvc-data.com Phone +45 25 12 84 02
2014-03-13 US 0.17
35/47