Add A New Access Profile – Menu "Settings" - > "Access" -> "Access Profiles" –"Add - MVC-Data GC630 User Manual

AccessZone® - PcManagement™ User Manual
4.6.1 Add a new Access Profile – Menu "Settings" - > "Access" -> "Access Profiles" –"Add"
This view shows the new Access Profile menu. This menu can also be open by right clicking on the
"Profile" drop down list in the graphical user interface to the left.
"Name" specify the profile name
"Description" write a short description to make it easy to understand the purpose of the
Access Profile
"Gates in profile" select all the doors/gates to use with that Access Profile
"Gates not in profile" use the '<' or '>' to add or remove doors/gates from the Access
Profile
"Access" specifies the time profile to use in the Access Profile for each of the selected
GateControllers in the Access Profile. Click "Opening Hours" to select any combination e.g.
1 and 3 or 1 and 2 etc. of the defined time profiles or "Full Access" or "No Access" (blocked
mode)
Note!
The time profiles may differ between GateControllers depending on user selection. Refer
to section 4.8.1 Time Profile - Menu "Opening Hours"
Click "Add" to store the new Access Profile. Click "Cancel" to leave without changes.
TIP!
Remember to add a new GateController™ to new and any existing access profiles as required
allowing the profiles to work with the new GateController™.
All information is subject to change without notice. All other products and brand names are registered trademarks of their respective companies
Copyright © 2005-2014 All rights reserved MVC-Data ApS Skalhuse 5 9240 Nibe Denmark Web www.mvc-data.com E-mail info@mvc-data.com Phone +45 25 12 84 02
Click "<" to add or
">" to remove the
selected GateController
2014-03-13 US 0.17
22/47