"Access" -> "Users"-> "Add - MVC-Data GC630 User Manual [Page 17]">
Download Table of Contents Contents Print this page

Add A New User – Virtual Key Pad – Menu "Settings" - > "Access" -> "Users"-> "Add - MVC-Data GC630 User Manual

Table of Contents

Advertisement

AccessZone® - PcManagement™ User Manual
4.5.2 Add a new User – Virtual Key pad – Menu "Settings" - > "Access" -> "Users"-> "Add"
The system supports a virtual keypad feature which can operate in two different modes: Virtual
Key Only Mode and Virtual Keypad Mixed Mode
This feature will allow access to all users that know the 4 digit access PIN code.
4.5.2.1 Only Mode
The system can be configured to run as a purely virtual key pad. I.e. no specific users have to be
added.
Common keypad:
The system administrator adds a "user" with the special BD address "FFFFFFFFFFFF" (not a valid BD
address) and the desired 4 digit access PIN code. This "user" and access PIN code is the same for
TM
all GateControllers
in the system.
Individual keypad:
The system administrator adds a "user" with the special BD address "FFFFFFxxxxxx" (not a valid BD
address) and the desired 4 digit access PIN code. "xxxxxx" is the GateControllers lower address
part, in example with 00078043633F xxxxxx = 43633F and can be found in the "Info" box. This
TM
"user" and access PIN code is individual for that GateController
.
The system will in this mode grant access to all users which enter the correct 4 digit virtual keypad
access PIN code.
The PIN code can be disabled if "0000" is used as PIN code and thereby give access to all with a
Bluetooth enabled device – a simple gate/door opener.
TIP!
The system administrator can at any time change the PIN code. E.g. on a daily or weekly basis.
4.5.2.2 Mixed Mode
The system can also be configured to be in mixed mode virtual key pad with up to the system limit
minus 1 (number of supported users depends on the license acquired) of unique users and a
virtual keypad user with the special common BD address "FFFFFFFFFFFF" or individual BD address
"FFFFFFxxxxxx" and the 4 digit access PIN code.
The system will in this mode grant access to all individually added users with their unique 4 digit
access PIN code and to all other unknown users which enter the correct 4 digit virtual keypad
access PIN code.
TIP!
This feature allows the virtual keypad PIN code to be changed without affecting all the individually
added users.
The common virtual keypad can be combined with the individual keypad "user" on selected
GateControllers. If both the virtual keypad "user" and the individual "user" are used with a
GateController - the individual PIN code is used.
All information is subject to change without notice. All other products and brand names are registered trademarks of their respective companies
2014-03-13 US 0.17
17/47
Copyright © 2005-2014 All rights reserved MVC-Data ApS Skalhuse 5 9240 Nibe Denmark Web www.mvc-data.com E-mail info@mvc-data.com Phone +45 25 12 84 02

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GC630 and is the answer not in the manual?

This manual is also suitable for:

Gc640Gc3000Accesszone pcmanagementGc670

Table of Contents