User Acceess Notification – Menu "Settings" - > "Access" -> "Users"- "Notifications - MVC-Data GC630 User Manual

AccessZone® - PcManagement™ User Manual
4.5.5 User Acceess Notification – Menu "Settings" - > "Access" -> "Users"- "Notifications"
This view shows the menu for specifying the email notification to send for all access for a
particular user:
"E-mail notification on access" select if an email notification is required on all access for
that particular user
"E-mail notification if user is blocked by gate controller" select if an email notification is
required in case the system blocks that particular user for any further accesses.
This could be the case if the user has entered the 4 digit access PIN code wrong 3 times in a
row. System administrator must then remove the "Block All Access" marking for the user to
allow access again. See section User Acceess Profile.
The user will be marked as blocked in the user list to the left:
"Use global email" specify whatever the global email account should be used to send the
event or specify a custom one for that particular user
Edit the notification settings. Select "User" or "Access" to make further changes and click "Save"
when done to store the new settings.
All information is subject to change without notice. All other products and brand names are registered trademarks of their respective companies
Copyright © 2005-2014 All rights reserved MVC-Data ApS Skalhuse 5 9240 Nibe Denmark Web www.mvc-data.com E-mail info@mvc-data.com Phone +45 25 12 84 02
Click a notification to
enable it.
Specify to use a
common email
address or enter a
unique email address
for that particular
user
2014-03-13 US 0.17
20/47