MVC-Data GC630 User Manual page 34

AccessZone® - PcManagement™ User Manual
4.8.2.3 Keep Open option:
The keep open feature allows the GateController to work as an automatic door/barrier/gate
opener. It is well suited for access control to more public areas. It works after the specified time
interval either after access has been granted to valid user or full automaticly after the time
schedule specified.
Note!
The keep open feature follows the settings for weekday access and the system calendar.
"Enable Keep Open" specifies the time interval where the door/barrier/gate will be kept
open from and automatically closed again. Set a mark in the check box to enable feature.
o Select "Follow Time Profile 1" to use the same time interval as time profile 1
o Select "Follow Time Profile 2" to use the same time interval as time profile 2
o Select "Follow Time Profile 3" to use the same time interval as time profile 3
o Select "Follow Time" to specify a new additional time interval
Note! This setting does not have a weekday setting
The first valid user which is granted access will open the door/barrier/gate.
TIP!
Select any combination of the 4 keep open time intervals.
o Select "Enable Automatic Gate Open" to automatically open the door/barrier/gate at
the beginning of the specified time without any user intervention.
Note!
o "Follow Time Profile 1,2 and 3 are only supported by firmware versions:
• GC630/GC640/GC670 from version 2.03
GC3000 from version 1.96
• Older firmware versions only supports the "Follow Time" option but not the
"Enable Automatic Gate Open" feature.
o The "Use Access Keep Open Time" feature must also be enabled for the users to be
functional. I.e. both must have this feature enabled. Default is disable.
All information is subject to change without notice. All other products and brand names are registered trademarks of their respective companies
Copyright © 2005-2014 All rights reserved MVC-Data ApS Skalhuse 5 9240 Nibe Denmark Web www.mvc-data.com E-mail info@mvc-data.com Phone +45 25 12 84 02
Time setting from Time Profiles
Additional time setting
2014-03-13 US 0.17
34/47