Gatecontroller™ Settings –"Gates - MVC-Data GC630 User Manual

AccessZone® - PcManagement™ User Manual
4.8 GateController™ Settings –"Gates"
The GateController™ settings are unique for each GateController™ in the system. The menu can be
open by right clicking on the GateController™ in the list to the left or directly on the
door/barrier/gate symbol on the graphical user interface.
4.8.1 Time Profile - Menu "Opening Hours"
The image shows the menu to setup the opening hours for the GateController™. It is possible to
specify 3 different time profiles (intervals) and select which week days access is allowed. These
time and day profiles are used when creating the access profiles.
"Time Profile 1,2 & 3" sets the beginning and ending time and specify which week days the
time interval is valid for. The time intervals may overlap
"Use Calendar" is selected to enable the calendar function for that particular
GateController™. A green color means that access is allowed that day. Mark a date as
closed (Red) by clicking on the date. Click again to make the date an normal open day. Click
'>>' to go to the next month and '<<' to go back again. It will always show current month
and one year ahead making it possible to set open and close days for one year at a time.
Note!
The "Use Calendar" option must also be enabled in all the user profiles to make this
function work. I.e. if either have this option disabled the feature is disabled. This allows
that some users run according to the calendar and others not.
"Manual Operation of Gate" is used to manually control the door or gate remote. Click
"Open Gate" to open the door/barrier/gate etc.
All information is subject to change without notice. All other products and brand names are registered trademarks of their respective companies
Copyright © 2005-2014 All rights reserved MVC-Data ApS Skalhuse 5 9240 Nibe Denmark Web www.mvc-data.com E-mail info@mvc-data.com Phone +45 25 12 84 02
2014-03-13 US 0.17
30/47