Decoration Plate Left/Right - Epson L1800 Service Manual

L1800

3.2.6 Decoration Plate Left/Right

1. Remove the Rear Housing. (p.46)
2. Remove the Front Decoration Plate Left/Right. (p.46)
3. Remove the Ink Supply Tank Assy from the Decoration Plate Right.
4. Remove the four C.B.P. M3 x 8 screws that secure the Ink Eject Cover 1st, and
remove the Ink Eject Cover 1st.
5. Remove the four C.B.P. M3 x 8 screws that secure the Ink Eject Cover 2nd, and
remove the Ink Eject Cover 2nd.
6. Remove the two C.B.P. M3 x 8 screws that secure the Decoration Plate Right.
Decoration Plate Right
4) C.B.P. M3x8
(6±1 kgf.cm)
2
Ink Eject Cover 2nd
Figure 3-22. Removing the Decoration Plate Left/Right (1)
Disassembly And Assembly
4) C.B.P. M3x8
(6±1 kgf.cm)
3
4
1
Ink Eject Cover 1st
7. Release the three hooks on the front of the Decoration Plate Right and lift the plate
a little to release the tab and the four guide pins on the upper side, then remove the
Decoration Plate Right.
8. In the same way as in Step 7, remove the Decoration Plate Left.
Tab
Hook (x3)
Figure 3-23. Removing the Decoration Plate Left/Right (2)
Removing the Housings
Revision A
Guide pin (x4)
Decoration Plate
Right
49
Confidential