Protection For Transportation - Epson L1800 Service Manual

L1800

3.1.5 Protection for Transportation

Before packing the printer for returning it to the user, secure it at the specified points
with strong tape to avoid damaging the printer or ink leakage during transport, and
make sure to check the points as follows.
 Securing each parts
Secure the following parts with strong tape.
 Securing the Carriage Unit
Prepare a piece of strong tape (length: 205
1. Confirm that the Carriage Unit is locked in the home position.
2. Attach the unfolded end of strong tape (fold the other end back 5 mm) on the
bottom left of the Adapter Cover.
3. Move the carriage in the direction of the arrow (130 digit side) in
until it touches the Carriage Lock.
4. Pull the tape toward the right side of the housing and attach it tightly along the
shapes of the housing as shown in
Step2
Strong tape
Figure 3-6. Securing the Carriage Unit
Disassembly And Assembly
±
2 mm, width: 22 mm).
Figure 3-6
Figure 3-6 to secure the Carriage Unit.
Adapter Cover Carriage Unit
Step3
Step4
Attach the tape on the
housing to leave any gap. Folded end
 Securing the Ink Tank
Prepare two pieces of strong tape (length: 90
1. Install the Ink Supply Tank Assy to the printer.
2. Secure the Decoration Plate Right, Ink Supply Tank Assy, and Top Cover
with strong tape (x2).
Strong tape
Ink Supply Tank Assy
Figure 3-7. Securing the Ink Supply Tank Assy
Overview
Revision A
±
2 mm, width: 22 mm).
Decoration Plate Right Strong tape
Folded end
Top Cover
Confidential
40