Epson L1800 Service Manual page 53

L1800
2. Disengage the nine hooks on the bottom of the Panel Unit, and remove the Panel
Unit while pulling out its tab.
3. Disconnect the Panel FFC from the Panel Board connector and remove the Panel
Unit.
Hook
Tab
Figure 3-20. Removing the Panel Unit (2)
Disassembly And Assembly
Panel Unit
Connector
Panel FFC
Removing the Housings
 Be careful not to get the Panel FFC caught underneath the
hooks on the Panel Unit.
 Secure the Panel FFC to the Panel Unit with a piece of double-
sided tape.
Figure 3-21. Securing the Panel FFC
Revision A
Panel Unit
Double-sided tape
Panel FFC
48
Confidential