Epson L1800 Service Manual page 10

L1800
Table 1-4. Indicators (LEDs) Function
Printer Status
Flashes at
Power off (shutting down)
high speed
Firmware update (While preparing)
Firmware update (Starting)
Fatal error
Ink waste pad overflow error
Ink waste pad near end error
Paper jam error
Initial Ink Charge Preparing
Initial Ink Charge Waiting
Initial Ink Charging
alternately 1
Multi-feed error
Paper out error
Ink Sequence
PC Printing
Stop printing & job canceling
Loading / Ejecting
Power On Sequence
Idle
2
Reset Requirement*
Note *1: When two or more errors occur at the same time, the one with higher priority will be
indicated.
*2: The all LEDs light for 0.2 seconds when a reset requirement is received.
Product Description
Indicators (LEDs)
Power Paper Ink
-- --
-- -- --
Flashes OFF OFF
Flashes at Flashes at
OFF
high speed high speed
Flashes Flashes
--
alternately 1 alternately 2
Flashes Flashes
--
alternately 1 alternately 2
-- Flashes --
Flashes -- OFF
ON -- ON
Flashes Flashes
--
alternately 2
-- ON --
-- ON --
Flashes -- --
Flashes -- --
Flashes -- --
Flashes -- --
Flashes -- --
ON -- --
ON ON ON
Operation Buttons & Indicators (LEDs)
Note : --:No change
Flash: Repeats turning On and Off every 1.25 seconds.
Flash at high speed: Repeats turning On and Off every 0.5 seconds.
Priority* 1
Flashes alternately 1:Same as the "Flash"
Flashes alternately 2:Repeats turning Off and On every 1.25 seconds.
1
2
3
4
5
6
7
8
9
11
12
13
14
15
16
17
18
--
Revision A
5
Confidential