Specifications - Toro Groundsmaster 4300-D Operator's Manual

4. Press the middle button to enter the PIN code
(Figure 11D).
Wait until the red indicator light of the InfoCenter
illuminates.
Note:
If the InfoCenter accepts the PIN code
and the protected menu is unlocked, the word
"PIN" displays in the upper right corner of the
screen.
Note:
Rotate the key switch to the O
then to the O position locks the protected menu.
N
You have the ability to view and change the settings in
the Protected Menu. Once you access the Protected
Menu, scroll down to Protect Settings option. Use the
right button to change the setting. Setting the Protect
Settings to O allows you to view and change the
FF
settings in the Protected Menu without entering the
PIN code. Setting the Protect Settings to O
protected options and requires you to enter the PIN
code to change the setting in the Protected Menu.
After you set the PIN code, rotate the key switch O
and back to the O position to enable and save this
N
feature.
To Set the Counterbalance
•
In the Settings Menu, scroll down to
Counterbalance.
•
Press the right button to select counterbalance
and change between the low, medium, and high
settings.
To Set the Auto Idle
•
In the Settings Menu, scroll down to Auto Idle.
•
Press the right button to change the auto idle time
between OFF, 8S, 10S, 15S, 20S, & 30S.

Specifications

Note:
change without notice.
Transport Width
Width of cut
Length
Height
position and
FF
Fuel tank capacity
Transport speed
Mowing speed
Net weight*
* With cutting decks and fluids
hides the
N
FF
18
Specifications and design are subject to
226 cm (89 inches)
229 cm (90 inches)
320 cm (126 inches)
218 cm (86 inches)
51 liters (13.5 US gallons)
0–16 kph (0–10 mph)
0–13 kph (0–8 mph)
1,492 kg (3,289 lb)