Setup - Toro Groundsmaster 4300-D Operator's Manual

Setup

Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
3
4
Media and Additional Parts
Description
Operator's Manual
Engine Operator's Manual
Parts Catalog
Operator Training Material
Note:
Determine the left and right sides of the
machine from the normal operating position.
1
Adjusting the Tire Pressure
No Parts Required
Procedure
The tires are over-inflated for shipping. Therefore,
release some of the air to reduce the pressure.
Correct air pressure in the front and rear tires is 83
to 103 kPa (12 to 15 psi).
Important:
Maintain even pressure in all tires to
ensure uniform contact with the turf.
Description
No parts required
No parts required
No parts required
No parts required
Qty.
–
–
–
–
Qty.
1
1
Review before operating machine
1
1
2
Adjusting the Step Height
No Parts Required
Procedure
The height of the steps can be adjusted for the
operators comfort.
1. Remove the 2 bolts and nuts securing the step
brackets to the traction unit frame
11
Use
Adjust the tire pressure.
Adjust the step height.
Adjust the control arm position.
Remove shipping blocks and pins
Use
(Figure 2)