Understanding The Diagnostic Light - Toro Groundsmaster 4300-D Operator's Manual

Figure 39
1. Front tie down
•
Rear—each side of the machine on the rear frame
(Figure 40).
Figure 40
1. Rear tie down
Understanding the
Diagnostic Light
The machine is equipped with a diagnostic light which
indicates if the machine detects a malfunction. The
diagnostic light is located on the InfoCenter, above
the display screen
functioning properly and the key switch is moved to
the On/Run position, the diagnostic light will turn on
briefly to indicate the light is working properly. When
a machine advisory message is displayed, the light
will illuminate when the message is present. When
a fault message is displayed, the light will blink until
the fault is resolved.
g004558
1. Diagnostic light
Changing the
Counterbalance Settings
During different times of the mowing season or when
turf conditions vary, the amount of counterbalance
(upward lift) required on the cutting decks can be
changed to meet the conditions.
g004555
1. Position the machine on a level surface, lower
the cutting decks, stop the engine, engage the
parking brake, and remove the key from the
ignition switch.
2. In the InfoCenter Settings Menu, scroll down to
Counterbalance.
3. Press the right button to select counterbalance
and change between the low, medium, and high
settings.
Note:
Once the adjustment has been
completed, move the machine to a test area and
operate the machine with the new setting. The
new counterbalanced setting may change the
effective height of cut.
33
(Figure 41). When the machine is
Figure 41
g021272