Machine Features And Technical Data - FIORENTINI I115SSDE Instructions For Use And Maintenance Manual

2.1. MACHINE IDENTIFICATION
An adhesive machine identification label containing indelible "CE" marking details is affixed on the right-hand
guard just below the driver's seat.
The label must never be removed and should always be kept readable. In case of
damage a duplicate should be ordered. The machine may not be sold without this label.
2.2. DESCRIPTION AND COMPONENTS
This combined sweeping-scrubbing-drying machine has been designed for use on flat surfaces according to
a combined cleaning process which includes: surface sweeping, wet scrubbing and subsequent washing
water suction process. The machine is powered off the box-type battery.
The machine consists of the following parts:
 an electric motor connected to a variable delivery hydraulic pump and a fixed delivery hydraulic
pump;
 a rear drive hydraulic motor, connected via the hydraulic system to the variable delivery pump
actuated by the operator through the control pedal;
 two front side brushes;
 a centre roller brush;
 a fine particle suction system;
 a waste collection box;
 three scrubbing brushes located centrally behind the roller brush;
 a floor-wiping squeegee;
 a polyethylene washing solution filling tank;
 a polyethylene recovery tank for washing effluents with inlet and outlet suction hose;
 a box-type battery;
 a hydraulic power steering assembly;
 driving seat.
Rev. 001

MACHINE FEATURES AND TECHNICAL DATA

2. MACHINE FEATURES AND TECHNICAL DATA
FIGURE N. 2.1
22/12/2014
I115SS
7/58