Sweeping Brushes Replacement And Maintenance - FIORENTINI I115SSDE Instructions For Use And Maintenance Manual

4.7.8

SWEEPING BRUSHES REPLACEMENT AND MAINTENANCE

Centre brush replacement:
 open the right-hand side guard through the release hinge (fig. 4.16)
 screw out the 4 wing nuts fixing the rubber dust seal stop plate (figure 4.17).
 remove the stop plate and take out the rubber dust seal. (fig. 4.18)
 loosen the screw (detail 1, figure 4.19) and open the brush support guard (fig. 4.19)
 remove the brush (detail 1 figure 4.20)
 replace the brush checking that it is inserted in the driving flange pins on the opposite side (detail 1
figure 4.18)

now repeat the disassembly operations described here above in reverse order.
FIGURE 4.16
2
FIGURE 4.19
1
Rev. 001
MAINTENANCE
22/12/2014
FIGURE 4.17
FIGURE 4.18
36/58
I115SS