Scrubbing Brushes And Splash Guard Replacement - FIORENTINI I115SSDE Instructions For Use And Maintenance Manual

4.7.9

SCRUBBING BRUSHES AND SPLASH GUARD REPLACEMENT.

Proceed as follows to replace the scrubbing brushes:
 remove the key from the dashboard to prevent unwanted ignition after moving the plate all the way
out by pressing the button on the panel (detail 1 figure 4.26);
 open the metal skirting panel (detail 2 figure 4.26);
 loosen the right-hand guard knobs (part 3 figure 4.26);
 turn the right-hand brush until the release pin becomes visible (detail 4 figure 4.26);
 remove the brush;
 to install a new brush, ensure that it is in line with the coupling axis then firmly push it up;
 pull in the plate, open the left-hand guard and repeat the previously performed operations;
 after fitting the brushes, re-install the guards;
1
3
Before restarting the machine, ensure that the protective guards have been correctly
replaced.
Rev. 001
MAINTENANCE
FIGURE 4.26
22/12/2014
I115SS
2
4
39/58