Operator Qualifications - FIORENTINI I115SSDE Instructions For Use And Maintenance Manual

3.4.

OPERATOR QUALIFICATIONS

The table here below specifies the operator qualifications required for each operation to carry out.
OPERATION
Machine driving/control
Installation/removal
Mechanical parts maintenance
Electrical part maintenance
Cleaning maintenance
Dismantling and scrapping
The personnel in charge of operating the machine should be specifically trained, particularly in regard to
safety issues; machine operators must have read and become familiar with this manual.
FIORENTINI declines all responsibility for accidents involving persons or property caused by
not adequately skilled, unauthorised operators.
3.5. SAFETY AND WARNING DEVICES
 It is strictly forbidden to tamper with, remove or deactivate safety and warning
devices while the machine is in operation.
 The efficiency of safety and warning devices should be regularly checked (see point
5.1.).
Scrubbing brush guards
Roller centre brush
guards
Warning devices
Rev. 001
SAFETY
Skilled operator
Skilled operator
Skilled operator
Skilled operator
Skilled operator
Skilled operator
The machine I115SSE is equipped with three (standard) brushes with nylon
bristles that rotate during normal machine operation. Access to dangerous
areas is limited by fixed guards provided in each area. These safety guards
can only be removed intentionally. Removing a fixing element will cause the
obvious separation of the guard from the machine.
The machine is equipped with a roller centre brush that rotates during normal
use. Access to dangerous areas is limited by protective metal skirting plates
provided in each area. These protective plates can only be removed
intentionally. Removing a fixing element will cause the obvious separation of
the guard from the machine.
The machine I115SSE is equipped with several warning devices to alert
anyone who happens to be within the machine working range:

a horn-type acoustic signal to warn any persons who are near the
machine during normal use;

an intermittent acoustic signal (buzzer) to warn any nearby persons
while the machine is reversing;

a visual signal (yellow flashing lights) to indicate that the machine is in
operation;

lights for use in poorly lit areas.
22/12/2014
OPERATOR QUALIFICATIONS
I115SS
13/58