4.5.
INSTALLATION
Installation must be carried out by authorised personnel aware of the instructions
contained in this manual.
4.5.1 BATTERY INSTALLATION (battery powered version)
Follow these instructions for battery installation:
lift the battery cover by removing both locking pins and lifting it by the handle (detail 1 in figure 4.3.1);
open the right-hand side partition and remove the lower closure (detail 2 in figure 4.3.1;
connect the battery cart (figure 4.3.2) to the special fixing points in the machine frame (detail 2 fig
4.3.4);
slide the battery into the machine (fig. 4.3.3) and fix it by introducing the locking pin in its special seat
(detail 1 fig 4.3.4);
clean the matching surfaces and connect wirings;
wheel away the battery cart and reassemble the lower battery closure;
close the partition and the battery lid.
FIGURE 4.3.1
Rev. 001
START-UP AND OPERATION INSTRUCTIONS
1
2
22/12/2014
I115SS
FIGURE 4.3.2
22/58