Declaration Of Conformity - FIORENTINI I115SSDE Instructions For Use And Maintenance Manual

Combined model

Hide thumbs

Table Of Contents

Table of Contents

GENERAL INFORMATION

I115SS

 failure to observe the instructions contained in this manual;

 tampering or alterations introduced without FIORENTINI's specific approval;

 use of non-original spare parts;

 wear parts e.g. brushes, squeegee blades etc.

For installed electrical parts and commercially available parts, FIORENTINI S.r.l. will extend to purchasers

the same warranty terms granted to FIORENTINI itself by the parts' suppliers.

WARRANTY VALIDITY

The Ing.O.Fiorentini S.p.A. general terms conditions also apply to the warranty.

The manufacturer cannot be held responsible in any way for damages resulting from unauthorised

modifications made to the appliance, from the use of unsuitable brushes and accessories and after use of

the device other than that intended.

EXCLUSIONS

The warranty will not cover materials and components exposed to normal wear (brushes, squeegee blades

etc.) and those whose working life cannot be established beforehand.

WARRANTY APPLICATION TERMS

Defective components must be returned to FIORENTINI S.p.a. in order to establish the causes of any

observed defects and determine warranty applicability. Repairing and replacement under the warranty will be

carried out on FIORENTINI's premises, by subcontractors or on customer's premises. For services under the

warranty to be carried out on customer premises, power supply and any equipment that might be necessary

for repairing purposes will have to be provided by the customer.

PRODUCT RETURNS

In case of parts to be returned for replacement or repairs under the warranty, a written authorisation must be

obtained in advance from FIORENTINI's Technical Assistance Department.

All defective parts must be carefully repacked in order to avoid damages during transport. Products must be

returned on a free-on-board basis, complete with:

 the serial number read from the equipment ID plate (see point 2.1);

 the item code and installation position of the returned parts, read from the spare part list (see point 7.2);

 a detailed description of the observed defect and conditions under which it became apparent;

In case of defective electric or electronic components,

please return the parts separately from other materials,

so that waste

containing dangerous substances can be separated and

Waste Electrical and Electronic Equipment (WEEE) can be

recycled according to the 2002/96/EC Directive.

A missing machine data plate will imply the immediate loss of any warranty rights.

1.5.