Residual Dangers - FIORENTINI I115SSDE Instructions For Use And Maintenance Manual

3.7.

RESIDUAL DANGERS

Ever since the design phase, FIORENTINI has analysed all the possible dangers related to machine use in
order to eliminate or at the very least minimise the risk of injuries for machine operators. In order to minimise
the risk associated with residual dangers, danger signs and indications of accident-prevention systems and
procedures have been provided for machine operators.
DANGER OF CRUSHING
Crushing risks are possible:

during side brush adjustment;

during battery charging in case of sudden battery cover falling;

during oil tank filling in case of sudden battery cover falling;

during waste box filter inspection;

during squeegee adjustment;

during centre brush replacement and scrubbing;

during waste box emptying;
During sweeping side brush, centre roller and scrubbing centre brush adjustment, the operator must
ensure that the ignition key is not in its slot in the control panel, to prevent unwanted machine starts.
During battery charging, the operator must keep all body parts out of the battery compartment.
Danger pictograms are provided on the brush guards and collection tank (point 3.8.).
DANGER OF CRUSHING AND SHEARING
Crushing and shearing risks are possible:
 during waste box emptying;
 when installing or replacing batteries;
During waste box emptying, make sure that no-one is within dangerous areas with any body parts.
Danger pictograms are provided on the steering column safety guard (point 3.8.).
RISK OF OVERTURNING
Machine overturning is possible:
Rev. 001
SAFETY
22/12/2014
I115SS
15/58