Squeegee Replacement - FIORENTINI I115SSDE Instructions For Use And Maintenance Manual

To replace the right-hand and left-hand splash guards, loosen the 7 screws as shown in figure 4.27; by
loosening the 3 screws in the slot, height can be adjusted, too (detail 1 figure 4.27).
4.7.10

SQUEEGEE REPLACEMENT

The squeegee blades must be replaced when the edges become worn; the blade edges must be sharp to
ensure perfect drying.
To replace the squeegee proceed as follows:
 Remove the squeegee from the machine by loosening the screw in figure 4.28 and place it on a
workbench or leave it on the floor (figure 4.29)
 Loosen the strip by turning the lever (fig. 4.30/ 31) and screw out the two side wing nuts (fig. 4.32)
 Remove the steel strips (fig. 4.33)

Perform the same operations in reverse order to fit new blades then adjust the squeegee (fig. 4.34).
FIGURE N° 4.28
Rev. 001
MAINTENANCE
1
FIGURE N° 4.27
22/12/2014
FIGURE N° 4.29
I115SS
40/58