4.7.12 RH/LH RUBBER BLADE REPLACEMENT (centre brush).
Perform the following operations to replace the RH/LH lateral rubber blades:
remove the key from the dashboard to prevent unwanted ignition;
open the RH or LH side guard (figure 4.38);
screw out the wing nuts (figure 4.39);
remove the rubber blade fixing strip and remove the blade (figure 4.40);
repeat the disassembly operations described here above in reverse order.
FIGURE N° 4.38
FIGURE N° 4.41
Ensure that the rubber dust seal is flush with the floor after completing the replacement.
Rev. 001
MAINTENANCE
22/12/2014
FIGURE N° 4.39
FIGURE N° 4.40
I115SS
43/58