Table of Contents
Advertisement
This option exits and closes the KEUSB108.EXE program.
Note: Make sure that the KE-USB108 is connected to the PC
before performing either the "Read to KE-USB108" or "Write to
KE-USB108" operations. If the KE-USB108 is not present the error
message, "The KE-USB108 was not Found" will be displayed on
the computer screen.
Error Messages
"The KE-USB108 was not found":
This error occurs if the computer cannot communicate with the
KE-USB108 when trying to save to the KE-USB108 or read from
the KE-USB108. Check the cable connections to make sure they
are securely connected to the PC and KE-USB108.
"Error while reading from the KE-USB108":
This message indicates that, while the computer can communicate
with the KE-USB108, it was not able to read the configuration. If
this error message is displayed, read the configuration again. If
subsequent reads fail, then write a new configuration.
"Error while writing to the KE-USB108":
This indicates that, while the computer can communicate with the
KE-USB108, it was not able to write the configuration. If this error
message is displayed, write the configuration again.
"Invalid configuration file":
When loading an already existing configuration from a file or
uploading a configuration from the KE-USB108, the program will
give this error message if the file is corrupted or if it is the wrong
file type.
"Error opening the file":
This error message is shown if the KEUSB108.EXE program attempts
22
Advertisement
Table of Contents
