Danfoss ECL Comfort 296 Operating Manual page 86

Operating Guide ECL Comfort 210 / 296, application A267
MENU > Settings > Tank temperature
Start difference
Set the number of degrees below the desired DHW temperature that will
start the DHW heating (charging).
See Appendix "Parameter ID overview"
Value: Set the number of degrees.
86 | © Danfoss | 2018.01
1x195
=
X Time
# 1 # =
Charging difference (ID 1x193)
# 2 # =
Desired DHW temperature
# 3 # =
Start difference (ID 1x195)
# 4 # =
Actual DHW temperature
# 5# =
DHW heating / charging activity
Example:
Desired DHW temp.:
Start difference:
Result:
The DHW heating starts when the temperature measured by the tank
temperature sensor (upper) is lower than 52 °C.
55 °C
-3 K
VI.GU.G2.02