Operating Guide ECL Comfort 210 / 296, application A267
Service Pin
Circuit
This setting is only used in connection with set-up of Modbus
communication.
Not applicable for the time being and reserved for future
use!
Ext. reset
Circuit
This setting is only used in connection with set-up of Modbus
communication.
0:
Reset not activated.
1:
Reset.
6.8.11 Language
Language
Circuit
Choose your language.
104 | © Danfoss | 2018.01
Setting range
Factory setting
0 / 1
2151
Setting range
Factory setting
0 / 1
Setting range
Factory setting
English / 'Local'
English
2150
0
0
2050
Local language is selected during installation. If you want to change to
another local language, the application must be reinstalled. However,
it is always possible to change between the local language and English.
VI.GU.G2.02