Danfoss ECL Comfort 296 Operating Manual page 10

Operating Guide ECL Comfort 210 / 296, application A267
A267.1, example b
Indirectly connected system with 2 heating circuits and secondarily connected DHW tank with internal heat exchanger ( DHW priority).
Special settings for type A267.1, example b:
DHW circuit (circuit 3)
The DHW heating is controlled by means of changeover valve* P2.
Navigation:
MENU \ Settings \ Application: 'Ch.-o. valve / P'
The DHW tank is connected secondarily.
MENU \ Settings \ Application: 'Tank, sec./prim.'
*
The changeover valve can be of this type:
Danfoss AMZ 113
Normal power supplied. When the control voltage is applied (from terminal 12), the changeover valve changes flow direction.
10 | © Danfoss | 2018.01
ID no.:
Recommended setting:
13051
13053
OFF
OFF
VI.GU.G2.02