Danfoss ECL Comfort 296 Operating Manual page 11

Operating Guide ECL Comfort 210 / 296, application A267
A267.1, example c
Indirectly connected system with 2 heating circuits and primarily connected DHW tank with internal heat exchanger (optional DHW
priority).
Special settings for type A267.1, example c:
DHW circuit (circuit 3)
The DHW heating is controlled by means of ON / OFF valve* P2.
Navigation:
MENU \ Settings \ Application: 'Ch.-o. valve / P'
The DHW tank is connected secondarily.
MENU \ Settings \ Application: 'Tank, sec./prim.
*
The changeover valve can be of this type:
Danfoss AMZ 113
Normal power supplied. When the control voltage is applied (from terminal 12), the changeover valve changes flow direction.
VI.GU.G2.02
ID no.: Recommended setting:
13051
13053
ON
ON
© Danfoss | 2018.01 | 11