Connecting The Speaker Cables; Connecting The Subwoofer - Denon AVC-X8500H Owner's Manual

Contents Connections
o Connecting the speaker cables
Carefully check the left (L) and right (R) channels and + (red) and –
(black) polarities on the speakers being connected to this unit, and be
sure to connect the channels and polarities correctly.
1
Peel off about 10 mm of sheathing from the tip of the
speaker cable, then either twist the core wire tightly or
terminate it.
2
Turn the speaker terminal counterclockwise to loosen it.
3
Insert the speaker cable's core wire to the hilt into the
speaker terminal.
4
Turn the speaker terminal clockwise to tighten it.
Front panel Display
Playback Settings
o Connecting the subwoofer
Use a subwoofer cable to connect the subwoofer. Two subwoofers can
be connected to this unit.
To use two subwoofers, set "Subwoofer" to "2 spkrs" in the "Speaker
Config." setting. (v p. 224)
The level and distance can be set separately for Subwoofer 1 and
Subwoofer 2.
SW1
43
Rear panel
Tips
1 CBL/SAT 4 GAME FRONT SURROUND BACK FRONT CENTER
2 DVD 5 MEDIA PLAYER SURROUND CENTER SUBWOOFER SURROUND
7.1CH IN
3 Blu-ray 6 CD ZONE2 ZONE3 SURROUND BACK
AUDIO PRE OUT
(ASSIGNABLE)
STRAIGHT CABLE 1 TV 2 CD
DC12V 150mA MAX. 1 CBL/SAT 2 DVD
AUDIO
1 2
PHONO COAXIAL OPTICAL
AUDIO TRIGGER OUT REMOTE CONTROL RS-232C DIGITAL AUDIO
(ASSIGNABLE)
FRONT FRONT CENTER SURROUND SURROUND SURROUND BACK
Remote Index
Appendix
SUBWOOFER
1 2
HEIGHT1 HEIGHT3
HEIGHT2 HEIGHT4/FRONT WIDE
HEIGHT3 HEIGHT3 HEIGHT4/FRONT WIDE HEIGHT4/FRONT WIDE
ASSIGNABLE ASSIGNABLE
SURROUND BACK HEIGHT1 HEIGHT1 HEIGHT2 HEIGHT2
ASSIGNABLE ASSIGNABLE ASSIGNABLE
SPEAKERS
SW2