Setting The Back Light - Denon AVC-X8500H Owner's Manual

Contents Connections

Setting the back light

You can set the back light on the remote control unit to off to prolong the
life of the dry cell batteries.
The default setting is "ON".
0
1
Press and hold RC SETUP for more than 3 seconds.
"SETUP" and p indicator flashes twice on the remote control unit.
2
Use ui to display "LIGHT" on the remote control unit
and press ENTER.
3
Use ui to set the back light and press ENTER.
Remote control unit display
ON
OFF
Front panel Display
Playback Settings
Restoring all settings of the remote
control unit to default
All the settings are restored to their defaults.
1
2
3
Back light
4
Back light on
Back light off
275
Rear panel
Tips
Press and hold RC SETUP for more than 3 seconds.
"SETUP" and p indicator flashes twice on the remote control unit.
Use ui to display "RESET" on the remote control unit
and press ENTER.
Use ui to display "ALL" on the remote control unit
and press ENTER.
Use ui to display "YES" on the remote control unit
and press ENTER.
"RESET" flashes four times on the remote control unit and the
normal operation mode is restored.
Remote Index
Appendix