Remote Control Unit - Denon AVC-X8500H Owner's Manual

Contents Connections

Remote control unit

q
w
e
r
t
q w
y
Front panel Display
Playback Settings
A p indicator
This is lit when signals are sent from the remote control unit.
B AVR operation button
When preset codes are registered to the remote control unit, press this
button and then operate the menu on the unit.
C Zone select button (ZONE SELECT)
These switch the zone (MAIN ZONE, ZONE2, ZONE3) that is operated
through the remote control unit. (v p. 163, 169)
D Display
A Zone select indicators
B Information indicator
0
0
0
0
E Device operation buttons (DEVICE X / DEVICE MENU)
These turn the power of external devices on/off and call up menus.
Preset codes need to be registered in order to use these buttons.
(v p. 259)
F Input source select buttons
These select the input source.
"Selecting the input source" (v p. 100)
0
"Playback in ZONE2/ZONE3" (v p. 163)
0
28
Rear panel
Tips
This displays "AVR" when operating this unit.
This displays the input source name when operating an external
device.
This displays "TV" when operating TV.
This displays details about the setting on the remote control unit.
Remote Index
Appendix