Settings - Denon AVC-X8500H Owner's Manual

Contents Connections
Playback in ZONE2/ZONE3
ZONE SELECT
Input source
select buttons
MUTE :
Front panel Display
Playback
POWER X
USB USB
VOLUME df
Rear panel

Settings

1
Press ZONE SELECT to switch the zone mode.
The K or L indicator lights.
2
Press POWER X to turn on the ZONE2 or ZONE3 power.
The j indicator on the display lights.
Power in ZONE2 or ZONE3 can be turned on or off by pressing
0
ZONE2 ON/OFF or ZONE3 ON/OFF on the main unit.
3
Press the input source select button to select the input
source to be played.
The audio signal of the selected source is output to ZONE2 or
ZONE3.
To perform an operation with the main unit, press ZONE2
0
SOURCE or ZONE3 SOURCE. Each time you press ZONE2
SOURCE or ZONE3 SOURCE, the input source changes.
163
Remote
Tips Appendix
Index