Denon AVC-X8500H Owner's Manual page 37

Contents Connections
0 This unit is compatible with Dolby Atmos and DTS:X which offers an even wider
and deeper surround sensation.
0 Dolby Atmos is not supported in a 5.1-channel or less speaker configuration.
0 DTS:X can be selected regardless of the speaker configuration.
0 Auro-3D recommends adding FRONT HEIGHT and SURROUND HEIGHT
speakers to a 5.1 speaker configuration. Optionally, you may substitute REAR
HEIGHT, Dolby Atmos Enabled speakers instead of FRONT HEIGHT and
SURROUND HEIGHT speakers for Dolby Atmos, DTS:X and Auro-3D playback.
0 Use the illustration below as a guide for how high each speaker should be
installed. The height does not need to be exactly the same.
Top middle / Top surround speaker
Top front speaker
Front height /
Center height
speaker
Point slightly
downwards
Front speaker
Front wide
GViewed from the sideH
speaker
z1 30° - 45° z2 30° - 55°
z5 135° - 150°
z4 125° - 150°
Front panel Display
Playback
Surround height speaker
Top rear speaker
Rear height
speaker
Point slightly
downwards
Surround
back
speaker
Surround
speaker
z3 65° - 100°
37
Rear panel
Settings
Height speakers layout
FHL
FL
TFL
TML
SL
SHL
TRL
RHL
Viewed from the top
G
0 For the best Auro-3D experience Surround Height speakers are recommended,
however you may substitute Rear Height speakers from a Dolby Atmos speaker
setup in place of Surround Height speakers.
Remote
Tips Appendix
CH FHR
FR
TFR
C
TMR
SR
TS
SHR
TRR
RHR
H
Index