Manual Setup - Denon AVC-X8500H Owner's Manual

Contents Connections

Manual Setup

Perform when setting the speakers manually or when changing settings
made in Audyssey ® Setup.
If you add or remove a speaker after performing Audyssey
0
will no longer be able to select Audyssey MultEQ
Dynamic EQ or Audyssey Dynamic Volume
®
"Manual Setup" can be used without changing the settings. Please set if
0
necessary.
Front panel Display
Playback
Setup, you
®
XT32, Audyssey
®
. (v p. 179)
®
214
Rear panel
Settings
Amp Assign
Select the power amplifier usage method to match your speaker system.
o Assign Mode
Select how to use the power amp.
You need to configure the detailed settings for the speaker
configuration in accordance with the selected mode. Select Assign
Mode configure the corresponding detailed settings.
13.1ch
(Default):
11.1ch + ZONE2:
Remote
Tips Appendix
Settings to assign all power amplifier
0
within this unit to MAIN ZONE to play
back up to 13.1-channels.
You can connect speakers for up to 15.1-
0
channels for MAIN ZONE.
The speaker output automatically switches
for playing back up to 13.1-channels in
accordance with the input signal and sound
mode when 15.1-channel speakers are
installed.
Setting to assign the power amplifiers in
0
this unit for ZONE2 to 2-channels.
You can connect speakers for up to 11.1-
0
channels for MAIN ZONE.
Index