Nilfisk-Advance C 100.7 Repair Manual page 11

Dismount / mounting of switch box cover and switch box.
1. Remove the 2 screws . Fig 1
2. Release the snap on switch box form the hook on the switch box cover. Fig 2
3. Release the hook on the switch box from the snap on the switch box cover by using a
small ordinary screw driver and remove the switch box cover Fig 3
4. Assembly: Ensure that the cover/gasket on the on/off switch is correctly mounted in the
hole in the front part and the taps on the switchbox is fixed the slots in the ribs Fig. 4
5. Click on the switch box cover on the switch box and mount the 2 screws
Fig. 3
Fig. 4
Service / Repair.
Fig. 1
11
D
Fig. 2