Set Mode - Icom IC-M85 Instruction Manual

9

SET MODE

■ Using the Set mode
You can set seldom changed settings in the Set mode.
You can customize the transceiver settings to suit your
preference and operating style.
*1 Except the European, UK, and German versions.
*2 The "CH Display" item is displayed for each selectable channel
group.
• Beep
• Dual/Tri-watch
• CH Display* 2
• Man Down Alarm
19
• WX Alert* 1 • Scan Type
• SQL Key Action • Backlight
• Scrambler Code • VOX Level
• Lone Worker Alarm • Auto Volume Up
1. Turn OFF the transceiver.
2. While holding down [SQL], turn ON the transceiver to
enter the Set mode.
• The "Beep" item is displayed.
3. Push [SQL] or [H/L] to select an item.
4. Rotate [DIAL] to select an option.
5. Push [16/C] to exit the Set mode.
• Scan Timer
• Contrast
• VOX Delay
• MOB Alarm
• Auto Scan
• Power save
• AquaQuake Action