Activating Automatic Restart After Voltage Failure - Atlas Copco GA5 User Manual

User manual
1. Press arrow key (12) until “P007” is shown and press enter
key (5). The actually used starting mode is blinking: “1”
for Y-D (star-delta) or “0” for DOL (direct-on line).
2. Use arrow keys (12 and 13) to select another starting mode.
3. Press enter key (5) to program the new starting mode and
to return to the parameter screens.
7.15 Activating Automatic restart after
voltage failure
This parameter, accessible in screen “P008”, can only be
modified after entering a password. Consult Atlas Copco if
this function should be activated.
7.16 Selecting between Local or Remote
control
Starting from the Main screen:
1. Press arrow key (12) until “P009” is shown and press enter
key (5). The actually used control mode is blinking: “0” for
Local control mode or “1” for Remote control mode.
2. Use arrow keys (12 and 13) to select another mode.
3. Press enter key (5) to program the new control mode and to
return to the parameter screens.
7.17 Modifying the Parameter set
This parameter, accessible in screen “P010”, can only be
modified after entering a password.
2920 1461 03
Downloaded from www.Manualslib.com
bar
6.6
manuals search engine
13