System Tools - TP-Link TL-WR841HP Quick Installation Manual

Chapter 4
• Delegated
device will delegate it to the LAN.
• Static - Configure the
contact your ISP to get more information before you configure them.
Tips: If your IPv6 wan connection type is "Tunnel 6to4", the Site Prefix Configuration Type should be "Static" to
make sure "Tunnel 6to4" works properly.
4. Click Save.

4. 16. System Tools

4. 16. 1. LED Control
The LED control feature allows you to turn off or on the LEDs of the router automatically
when needed.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to System Tools
3. Tick Night Mode and select the
Save.
4. 16. 2. Time Settings
This page allows you to set the time manually or to configure automatic time
synchronization. The Router can automatically update the time from an NTP server via
the internet.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to System Tools
- Get the IPv6 address prefix from the ISP automatically, and the
Site Prefix
> LED Control.
LED Off Time
> Time Settings.
Configure the Router as a Standard Wireless Router
and Site Prefix Length
from the pull-down lists. Then click
manually. Please
65